产品概述Overview
自粘电磁线是在薄膜绝缘层外再加一层粘合涂层(bondcoat)。绕制成型后,通过加热、溶剂或两者结合,让相邻线圈粘结成一个自支撑的整体。 Bondable magnet wire adds an adhesive bondcoat over the film insulation. After winding, heat, solvent or both activate the coat so adjacent turns bond into a self-supporting unit.
线圈因此不再需要骨架、绑扎或浸漆就能保持形状——这对空心线圈、音圈与微型电机是决定性的。 The coil holds its shape without a bobbin, ties or varnish — decisive for air-core coils, voice coils and micro motors.
粘结涂层体系Bondcoat systems
不同粘结方案的核心差别在于三个参数:活化溶剂、粘结温度、软化温度。它们共同决定你的线圈是否需要进烘箱、能否承受后道工序的温度。 Bondcoats differ on three parameters: activation solvent, bonding temperature and softening temperature — together they decide whether you need an oven and what downstream heat the coil tolerates.
| 代号Code | 热等级Class | 活化方式Activation | 适用Best for |
|---|---|---|---|
| PB155 | 155 °C | 加热 / 溶剂Heat / solvent | 通用音圈、微型电机General voice coils, micro motors |
| PNB155 | 155 °C | 加热Heat | 需要耐磨表层的线圈Coils needing abrasion resistance |
| PB180 | 180 °C | 加热 / 溶剂Heat / solvent | 温升较高的自支撑线圈Higher-rise self-supporting coils |
| APTB | 200 °C | 加热Heat | 高可靠性与严苛环境High reliability, harsh environments |
选型建议Selection
- 软化温度必须高于线圈后续工序的最高温度,否则会散开Must exceed the highest downstream temperature or the coil will relax
- 粘结强度音圈需兼顾强度与阻尼特性Voice coils balance bond strength against damping
- 绕线速度溶剂活化快,适合高速量产Solvent activation is fast — suited to high-volume lines
- 与漆的兼容确认后道浸漆不会被粘合层排斥Confirm later varnish isn't repelled by the bondcoat
自粘线不是「更省事的普通线」。它需要你重新设计绕线后处理工序——省掉的是骨架和浸漆,增加的是活化环节。Bondable wire isn't just an easier round wire. It changes your post-winding process: you drop bobbins and varnish, but add an activation step.
常见问题Frequently asked questions
自粘线如何实现粘结?How does bondable wire bond?
线材表面带热激活或溶剂激活的粘结层,绕线后加热或溶剂处理,线圈自行固化,可免浸漆、免绑扎。A heat- or solvent-activated adhesive layer cures after winding, so coils self-bond without varnish or tying.
常见代号与热等级?Which codes and classes are typical?
PB155 对应 155 °C,PNB180 对应 180 °C,均为聚氨酯体系,可按端接工艺调整。PB155 for 155 °C and PNB180 for 180 °C, both polyurethane based and adjustable to the termination process.
适合哪些场景?Where is it used?
音圈、微型电机、无骨架线圈与需要薄型化的绕组,尤其适合无法浸漆的装配流程。Voice coils, micro motors, bobbin-less coils and thin windings — especially assemblies that cannot be varnished.
用自粘线绕完还需要浸漆吗?Do bondable coils still need varnish?
通常不需要。加热或溶剂处理后线圈已自固化,可以省掉浸漆、烘烤与绑扎三道工序;但如果绕组要承受持续高温、强振动或油冷环境,建议仍做含浸或改用自粘+含浸的复合方案。Usually not — heat or solvent activation cures the coil, removing varnish, baking and tying. For continuous high temperature, heavy vibration or oil-cooled duty, a combined bondable-plus-varnish route is still worth considering.
还有其他问题?把规格发给我们,48 小时内回复。Still have questions? Send us your spec — we reply within 48 hours.
询价与技术支持Quote & support
把规格发给我们。Send us the spec.
上海团队提供中文技术对接与等效替代建议;标准规格库存充足,常见型号 6–8 周内到货。Our Shanghai team handles Chinese-language support and cross-referencing; standard specs are well stocked, common models arrive in 6–8 weeks.