首页Home/ MWS wire

MWS WIRE INDUSTRIESMWS WIRE INDUSTRIES

MWS wire
产品体系
MWS wire
product system

标准绕组线要做到极致,才轮到特种线材。七条产品线覆盖从 105°C 普通漆包线到 240°C 聚酰亚胺,从整号规格到半号尺寸,从单根圆线到 2000 股精密绞合。 Master the standard winding wire first, then the specialty. Seven product lines from 105°C plain enamel to 240°C polyimide — whole and half sizes, single round wire to 2000-strand precision constructions.

NEMA MW 1000 · IEC 60317
AWG 4 – 50 · 105 – 240 °C

七条产品线Seven product lines

按截面与结构选择Choose by section and construction

不确定选哪一类?先把线径、温度与用量发来,我们帮你定位。 Not sure which? Send gauge, temperature and volume — we'll narrow it down.

Round magnet wire
01 / ROUND

圆线Round magnet wire

标准漆包线。PEN 到 ML 全热等级,含半号规格,库存最深。 Standard enamelled wire. Full thermal range from PEN to ML, half sizes stocked deep.

含详细介绍Details inside→
Shaped magnet wire
02 / SHAPED

异形线Shaped magnet wire

矩形、扁带与方线。截面几何决定槽满率与散热路径。 Rectangular, ribbon and square. Geometry drives fill factor and heat path.

查看详情View→
Bondable magnet wire
03 / BONDABLE

自粘线Bondable wire

带粘合涂层的电磁线,绕后加热或溶剂活化即自成型。 Film-insulated wire with a bondcoat — coils hold shape after heat or solvent activation.

查看详情View→
Microsquare wire
04 / MICROSQUARE®

Microsquare®Microsquare®

微方截面,同体积容纳更紧密的线圈,电机更小、槽满率更高。 Micro-square section: tighter coils, smaller motors, higher fill in the same volume.

查看详情View→
Litz wire
05 / LITZ

Litz 线Litz wire

多股独立绝缘绞合,抑制趋肤与邻近效应,面向高频与逆变器。 Individually insulated strands against skin and proximity loss — HF and inverters.

查看详情View→
Multifilar wire
06 / MULTIFILAR®

Multifilar®Multifilar®

多根并排粘结、独立绝缘配色,一次绕制完成多个绕组。 Parallel bonded, colour-coded wires — multiple windings in a single pass.

查看详情View→
Twistite wire
07 / TWISTITE®

Twistite® 预扭线Twistite® pre-twisted

出厂即完成精密预扭,最高每英寸 33 扭,用于环形与射频线圈。 Pre-twisted to order, up to 33 twists per inch, for toroids and RF coils.

查看详情View→
Plated alloy wire
08 / PLATING

电镀合金Plated Cu & Ni alloys

金、银、锡、镍镀层,铜与镍合金基材,按端接工艺选型。 Gold, silver, tin, nickel on Cu and Ni alloy — matched to your termination.

查看详情View→
Laser ablation
09 / LASER

激光剥离Laser ablation

紫外激光非接触去漆,卷对卷剥出定长窗口,导体无机械损伤。 Non-contact UV enamel removal, opening windows roll-to-roll with no conductor damage.

查看详情View→

热等级对照Thermal class reference

NEMA MW 1000 / IEC 60317NEMA MW 1000 / IEC 60317

绝缘热等级表示导线可长期承受并保持性能的温度区间,从普通漆的约 105°C 到聚酰亚胺的 240°C。下表为常用体系节选。 Thermal class indicates the temperature range a wire withstands while performing optimally — roughly 105°C for plain enamel to 240°C for polyimide. Selected systems below.

热等级Thermal class 绝缘类型Insulation type MWS 代号MWS code NEMA IEC 60317
105 °CPlain Enamel / FormvarPEN · FMW15MW 1560317-1
155 °CPolyurethaneP155MW 7960317-20
155 °CPolyurethane NylonPN155MW 8060317-21
155 °CPolyurethane BondablePB155MW 13160317-35
180 °CPolyurethaneP180MW 8360317-51
180 °CPolyurethane NylonPN180MW 8360317-55
180 °CPolyester-imidePTMW 3060317-8
180 °CPolyester-NylonPTNMW 7660317-22
200 °CPolyester — 200PT200MW 7460317-42
200 °CPolyester A/I TopcoatAPTMW 3560317-13
240 °CPolyimideMLMW 1660317-43

* 表格为节选。绝缘厚度可选 Single / Heavy / Triple / Quad build(依 NEMA MW 1000 定义)。完整体系与方线 / 矩形线标准请索取技术手册。 * Selection shown. Single, Heavy, Triple and Quad builds per NEMA MW 1000. Request the Tech Book for the full system and square/rectangular standards.

供货方式How we supply

库存、定制、支持——
三种节奏
Stock, custom, support —
three tempos

上海望溪作为 MWS 在中国的技术窗口,负责规格确认与本地技术支持;生产由 MWS 加州工厂或 ESSEX 全球产线完成。 Shanghai Wangxi is MWS's technical window in China — spec confirmation and local support, while production runs at the MWS California plant or Essex global lines.

A

现货From stock

标准规格库存充足,常见型号 6–8 周内到货Standard sizes in deep stock, typically 6–8 weeks to China

→
B

定制Custom build

非标截面、特殊绞距、特定镀层,数周内完成生产Non-standard sections, pitches and platings produced in weeks

→
C

技术支持Support

等效替代建议与中文规格书,工程团队直接对接Cross-reference advice and Chinese datasheets, straight from our engineers

→

常见问题FAQ

MWS wire 常见问题MWS wire FAQ

MWS wire 是什么品牌?What is MWS wire?

MWS wire 是 1968 年创立的美国电磁线与特种线材制造商,总部位于加州奥克斯纳德,具备拉丝、绞合、电镀与绝缘的完整工序。MWS wire is a US manufacturer of magnet and specialty wire founded in 1968, headquartered in Oxnard, California, with drawing, twisting, plating and insulation under one roof.

望溪与 MWS 是什么关系?How does Wangxi relate to MWS?

望溪是 MWS wire 的中国技术代理,负责规格确认、中文技术文档、库存查询与售后对接,不改变原厂规格与工艺。Wangxi is the China technical agent for MWS wire: spec confirmation, Chinese documentation, stock checks and after-sales, without altering original specifications.

MWS 有哪些产品线?Which product lines does MWS offer?

圆线、异形线、自粘线、Microsquare®、Litz 线、Multifilar®、Twistite®、电镀合金与激光剥离,共 9 条产品线。Round wire, shaped wire, bondable wire, Microsquare®, Litz, Multifilar®, Twistite®, plated alloys and laser ablation — nine lines in total.

最小起订量与交期?MOQ and lead time?

起订量低至单盘;标准规格库存充足,常见型号 6–8 周内到货。From a single spool. Standard specs are well stocked; common models arrive in 6–8 weeks.

MWS wire 在中国有库存吗?Is MWS wire stocked in China?

望溪在上海备有常见规格的现货与半号规格库存,标准规格库存充足;非常规结构按原厂排产,常见型号 6–8 周内到货。库存查询 48 小时内回应。Wangxi keeps common and half-size specs in stock in Shanghai. Non-standard constructions are scheduled at the factory; common models arrive in 6–8 weeks. Stock checks answered within 48 hours.

没有找到答案?把型号或图纸发给我们,48 小时内回复。No answer here? Send us the part number or drawing — we reply within 48 hours.

询价Quote

告诉我们线径、热等级与用量。Tell us gauge, thermal class, volume.

上海团队 48 小时内回应,可提供中文规格书与等效替代建议;标准规格库存充足,常见型号 6–8 周内到货。Our Shanghai team replies within 48 hours, with Chinese datasheets and cross-reference advice; standard specs are well stocked, common models arrive in 6–8 weeks.

获取报价Request a quote→