首页Home/ MWS wire/ Microsquare®Microsquare® magnet wire

04 / Microsquare®04 / Microsquare®

Microsquare®Microsquare® magnet wire

Microsquare® 是 MWS 的商标产品:以微小方形截面替代圆形,把圆与圆之间的空隙填满,在同样体积内塞进更多铜。 An MWS trademark: a micro-square section that fills the gaps circles leave, packing more copper into the same wound volume.

MICROSQUARE®
+15–25% FILL

产品概述Overview

Microsquare® 是 MWS 的商标产品:以微小的方形截面替代圆形。当线圈空间被压缩到极限时,方形的边角正好嵌进圆与圆之间的空隙。 Microsquare® is an MWS trademark: a micro-square section replacing the circle. When coil space is squeezed to the limit, square corners fill the gaps circles leave behind.

结果是在同样的绕制体积内塞进更多铜——更小的电机、更高的槽满率,或同等输出下更短的绕组长度。 The result is more copper in the same wound volume — smaller motors, higher fill, or shorter windings for the same output.

截面Section
Square
相对圆线vs round
+15–25% 填充
线径范围Size
AWG 30 – 44
商标Mark
MWS®
Microsquare
微方截面在紧密绕制时的堆叠方式How micro-square sections stack in a tight wind

为什么值得Why it matters

圆线Round Microsquare®Microsquare®
槽内空隙Void in slot较大,约 20–25%Large, ~20–25%显著减少Substantially reduced
同槽铜量Copper per slot基准Baseline提升 15–25%+15–25%
散热路径Heat path点接触Point contact面接触,导热更均匀Face contact, more even conduction
绕线工艺Winding成熟、宽容度高Mature, forgiving需控制导向与张力Needs guide and tension control

Microsquare® 的价值来自「空间」而不是「性能」。如果你的电机槽本身就充裕,它带来的收益可能抵不上工艺调整的成本。Microsquare® buys space, not performance. If your slot is already generous, the process changes may outweigh the gain.

应用与限制Applications & limits

  • 适用微型电机、传感器线圈、助听器、振动马达Micro motors, sensor coils, hearing aids, vibration motors
  • 不适用需要频繁折弯或高张力绕制的场合Applications with repeated bending or very high winding tension
  • 绝缘薄壁绝缘优先,否则方角处易损伤Thin builds preferred — corners stress insulation
  • 定制可按你的槽形与绕线节距匹配截面Section matched to your slot geometry and pitch

我们建议先小批量试绕验证。方线对导向器与张力的敏感度远高于圆线,实验室里绕得通不等于产线上稳。 We recommend a trial spool first. Square sections are far more sensitive to guides and tension — success in the lab isn't stability on the line.

常见问题Frequently asked questions

Microsquare® 是什么?What is Microsquare®?

MWS 的注册商标产品,指方形截面的电磁线,线径范围 AWG 30–44。A registered MWS product: square-section magnet wire in the AWG 30–44 range.

相比圆线能提升多少填充率?How much fill factor does it add over round wire?

同占用面积下约提升 15–25%,同时改善散热与绕组一致性。Roughly 15–25% in the same footprint, with better heat transfer and winding consistency.

典型应用?Typical applications?

微型电机、传感器、音圈以及医疗与消费电子中的小型绕组。Micro motors, sensors, voice coils and small windings in medical and consumer electronics.

方线和圆线的槽满率差多少?How much fill factor does square wire add over round?

同占用面积下,Microsquare® 方线比圆线多塞 15–25% 的铜,具体取决于线径与排列方式:线径越细、排列越规整,差距越明显。代价是绕线工艺要求更高,张力与排线精度都要跟着提。In the same footprint, Microsquare® fits 15–25% more copper, depending on gauge and packing. Finer wire in a regular array gains the most — at the cost of tighter winding tension and traverse accuracy.

还有其他问题?把规格发给我们,48 小时内回复。Still have questions? Send us your spec — we reply within 48 hours.

询价与技术支持Quote & support

把规格发给我们。Send us the spec.

上海团队提供中文技术对接与等效替代建议;标准规格库存充足,常见型号 6–8 周内到货。Our Shanghai team handles Chinese-language support and cross-referencing; standard specs are well stocked, common models arrive in 6–8 weeks.

获取报价Request a quote→