从铜杆到线盘From rod to spool
技术支持Technical support
我们为高技术客户建立了敏捷产线,专门完成拉丝、成形、绕包、绞合与绝缘。短周期生产与快速交付是我们的专长。 We built an agile facility for drawing, shaping, serving, twisting and insulating wire for high-technology users worldwide. Short runs and quick turnarounds are our specialty.
拉丝与成形Drawing & shaping
从圆线到扁线、方线与异形截面,尺寸控制精度直接决定线圈的槽满率与绕线一致性。MWS 拥有大量专为特种线材而造的设备,可按产品与批量灵活排产——从专门用于研发的单机,到连续运转供给 OEM 大批量需求的高效机组。 From round to flat, square and custom profiles — dimensional control decides slot fill and winding consistency. MWS runs equipment built specifically for specialty wire, laid out to cover every product and volume: from machines dedicated to R&D to high-productivity lines feeding OEM demand.
绞合与绕包Twisting, serving & twisting
Litz 结构、预扭线、丝包与薄膜绕包——绞合节距与绕包张力是能否稳定交付的关键参数。我们的设备可按客户指定的绞距与绕组拓扑生产,并对每批次的扭距公差进行抽检。 Litz constructions, pre-twisted wire, silk serving and film wrapping — pitch and tension are the parameters that decide repeatability. Equipment runs to customer-specified pitch and topology, with per-lot twist tolerance checks.
电镀与合金Plating & alloys
自定义电镀的铜与镍合金线,可选金、银、锡、镍镀层。镀层厚度与附着力会影响可焊性、接触电阻与长期稳定性——我们会按你的端接工艺(焊接、压接、激光焊接)推荐方案。 Custom plated Cu and Ni alloy wire in gold, silver, tin and nickel. Thickness and adhesion drive solderability, contact resistance and long-term stability — we recommend per your termination process: solder, crimp or laser weld.
绝缘与热等级Insulation & thermal class
聚氨酯、聚酯、聚酰亚胺等涂层体系覆盖 105°C 至 240°C,绝缘厚度可选 Single / Heavy / Triple / Quad build。对线圈浸漆与封装工艺,我们同时考虑化学兼容性。 Polyurethane, polyester and polyimide systems cover 105°C to 240°C, in Single, Heavy, Triple or Quad builds. For varnish and encapsulation processes we also match chemical compatibility.
检测实验室Testing laboratory
我们对售出的每一根线负责。厂内设有业内规模最大、能力最全的质保实验室,可完成尺寸、直流电阻、介电强度、附着性与热冲击等测试,覆盖产品开发到认证阶段的全部验证。 We own the quality of every wire we sell. Our facility houses the industry's largest and most capable QA laboratory — dimensional, DC resistance, dielectric strength, adhesion and heat shock testing, from development through qualification.
工程工具Engineering tools
先算,再下单Calculate before you order
按 AWG 线径快速估算导体直径、截面积与直流电阻。基于标准铜电阻率 1.724 × 10⁻⁸ Ω·m(20°C),仅作选型初筛。 Estimate conductor diameter, cross-section and DC resistance from an AWG gauge. Based on copper resistivity of 1.724 × 10⁻⁸ Ω·m at 20°C — a first-pass selection aid.
导体电阻与重量按裸铜计算,未计入温升影响;含漆膜直径按 NEMA MW 1000 标称膜厚估算,随漆膜选项变化。 Resistance and weight are computed for bare copper (temperature rise excluded); overall diameter with film is estimated from nominal NEMA MW 1000 build thickness and follows the film selection.
ρ = 1.724×10⁻⁸ Ω·m · 铜密度 8.96 g/cm³ · 具体数据请参考 www.mwswire.com 规格书 ρ = 1.724×10⁻⁸ Ω·m · copper density 8.96 g/cm³ · refer to www.mwswire.com datasheets for exact values
NEMA MW 1000
美国电磁线标准,覆盖绝缘等级与尺寸公差。US magnet wire standard for insulation classes and dimensional tolerance.
IEC 60317
国际绕组线规范,与 NEMA 体系交叉对应。International winding wire specification, cross-referenced to NEMA.
ISO 9001
质量管理体系,贯穿产品开发至量产。Quality management from development through volume production.
The Copper Mark
负责任铜生产保证流程认证。Assurance for responsible copper production.
术语Glossary
电磁线术语表Magnet wire glossary
选型沟通里最常被混用的 12 个词,一句话说清。Twelve terms that get mixed up most often in selection conversations, each in one line.
- 电磁线 Magnet wire
- 用于电能与磁能相互转换的绝缘导线,是电机、变压器、继电器与电感绕组的基础材料。Insulated conductor used to convert electrical energy into magnetic energy — the base material of motors, transformers, relays and inductors.
- 漆包线 Enamelled wire
- 以漆膜作为绝缘的电磁线,最常见的形式;绝缘层由底漆、中间层与面漆多层涂覆而成。Magnet wire insulated by an enamel film, usually applied as base coat, middle coat and topcoat.
- Build(绝缘厚度等级) Build
- 漆膜厚度等级,分 Single、Heavy、Triple、Quad;等级越高耐压越好,但同槽铜量越少。Enamel thickness grade — Single, Heavy, Triple or Quad. Higher builds withstand more voltage but leave less copper in the slot.
- 热等级 Thermal class
- 绝缘体系可长期承受的温度上限,常见 105、130、155、180、200、220、240 °C。The maximum temperature an insulation system can endure continuously — commonly 105, 130, 155, 180, 200, 220 or 240 °C.
- 可焊性 Solderability
- 不机械剥漆即可直接锡焊的能力,聚氨酯类漆包线在约 370 °C 具备该特性。The ability to solder without mechanical stripping; polyurethane enamels achieve this around 370 °C.
- 槽满率 Fill factor
- 铁芯槽内导体截面积与槽面积之比,直接影响铜耗、温升与功率密度。Ratio of conductor area to slot area, directly affecting copper loss, temperature rise and power density.
- 趋肤效应 Skin effect
- 高频电流集中在导体表层、使有效截面下降的现象,是 Litz 线要解决的问题。At high frequency, current concentrates near the conductor surface, reducing effective area — the problem Litz wire solves.
- 节距 Pitch
- 绞合线完成一个完整捻回的长度,直接影响交流电阻与绕组的机械稳定性。The length of one full twist in a stranded conductor, affecting AC resistance and winding stability.
- AWG American Wire Gauge
- 美国线规。导体直径 d(mm) = 0.127 × 92^((36 − AWG)/39),数值越大线径越细。American Wire Gauge. Diameter d(mm) = 0.127 × 92^((36 − AWG)/39); higher numbers mean thinner wire.
- NEMA MW 1000 NEMA MW 1000
- 美国电磁线标准,规定绝缘等级、尺寸公差与试验方法,与 IEC 60317 交叉对应。The US magnet wire standard covering insulation classes, dimensional tolerance and test methods, cross-referenced to IEC 60317.
- 耐电晕 Corona resistance
- 绕组承受局部放电而不失效的能力,是变频电机(逆变器驱动)选材的关键指标。The ability of a winding to withstand partial discharge — a key criterion for inverter-duty motors.
- 自粘线 Bondable wire
- 表面带热激活或溶剂激活粘结层的电磁线,绕线后自行固化,可免浸漆与绑扎。Magnet wire with a heat- or solvent-activated adhesive layer that self-bonds after winding, removing varnish and tying steps.
技术方案Technical notes
把踩过的坑,
写成可以复用的方案。Field lessons,
written into reusable notes.
选型方法、工艺要点与失效分析会陆续发布在这里;有具体问题也可以直接来信点题。 Selection methods, process notes and failure analysis will be published here. Suggest a topic any time.
从竞品料号到可生产规格From a competitor part number to a buildable spec
拿到一个 MW 28-C 或 60317 编号,先确认四件事:导体截面、绝缘体系、热等级与 build——再核对可焊性与直焊温度。本文给出对照方法与三个常见陷阱。 Given an MW 28-C or 60317 number, confirm four things first: conductor section, insulation system, thermal class and build — then solderability and bonding temperature. Method and three common pitfalls.
阅读要点 →Read the essentials →Litz 线的股数与股径怎么定Sizing Litz: strand count and strand diameter
频率决定单丝直径的上限(趋肤深度),窗口面积决定总股数;绞距与股数分层影响交流电阻与绕线性。附一组 20–200 kHz 的推荐组合表。 Frequency caps strand diameter via skin depth; window area sets total strands; pitch and layering trade AC resistance against windability. With a 20–200 kHz recommendation table.
阅读要点 →Read the essentials →工业连接器选型:电流、防护与认证Industrial connector selection: current, ingress & approvals
按工作电流与插拔次数定系列,按环境定防护等级(IP/NEMA),再按目标市场定认证组合(UL/CSA/IEC)——以 HUBBELL 产品线为例。 Pick a series by working current and mating cycles, an enclosure rating by environment (IP/NEMA), then an approval set by target market (UL/CSA/IEC) — using the HUBBELL range as the example.
即将发布Coming soon常见问题FAQ
线材计算与工艺常见问题Wire calculation & process FAQ
AWG 和毫米怎么换算?How do I convert AWG to millimetres?
导体直径 d(mm) = 0.127 × 92^((36 − AWG)/39)。例如 AWG 21 的裸铜导体直径为 0.7229 mm,截面积 0.4105 mm²。d(mm) = 0.127 × 92^((36 − AWG)/39). AWG 21 gives a bare copper diameter of 0.7229 mm and an area of 0.4105 mm².
直流电阻怎么估算?How is DC resistance estimated?
R = ρL/A,20 °C 铜电阻率取 1.724×10⁻⁸ Ω·m。AWG 21、100 m 单根导体的直流电阻约 4.1999 Ω,每米约 0.0420 Ω。R = ρL/A with copper resistivity 1.724×10⁻⁸ Ω·m at 20 °C. AWG 21 over 100 m is about 4.1999 Ω, or 0.0420 Ω per metre.
漆膜厚度会影响外径吗?Does the enamel film change the overall diameter?
会。含漆膜直径 = 导体直径 + 2 × 单侧膜厚,Single / Heavy / Triple 按 NEMA MW 1000 标称值分档取值。Yes. Overall diameter = conductor diameter + 2 × single-side film thickness; Single, Heavy and Triple follow NEMA MW 1000 nominal values.
计算结果能直接用于设计定型吗?Can I use the result for final design?
不能。计算按裸铜、20 °C 与单根导体,未计温升、绝缘厚度与绞合系数,仅作选型初筛;定型数据请以 MWS 原厂规格书为准。No. It assumes bare copper at 20 °C and a single strand, ignoring temperature rise, insulation build and stranding factors. Use it for shortlisting only; final data comes from MWS datasheets.
AWG 24 的线径、截面积和电阻是多少?What are the diameter, area and resistance of AWG 24?
AWG 24 裸铜导体直径 0.5106 mm,截面积约 0.2047 mm²,每米直流电阻约 0.0842 Ω,100 m 约 8.42 Ω,百米铜重约 183 g。含漆膜后直径按 build 增加,Single 约 0.60 mm。AWG 24 bare copper is 0.5106 mm in diameter, about 0.2047 mm² in area and roughly 0.0842 Ω per metre — 8.42 Ω over 100 m, with about 183 g of copper. Overall diameter grows with the build; Single is around 0.60 mm.
没有找到答案?把型号或图纸发给我们,48 小时内回复。No answer here? Send us the part number or drawing — we reply within 48 hours.
需要更详细的参数?Need deeper data?
索取技术手册。Request the Tech Book.
完整尺寸表、绝缘厚度、热等级与测试方法都收录其中。Full size tables, insulation builds, thermal classes and test methods.