首页Home/ MWS wire/ Multifilar®Multifilar® magnet wire

06 / Multifilar®06 / Multifilar®

Multifilar®Multifilar® magnet wire

Multifilar® 把两根或更多并排粘结的电磁线做成一根成品线,各自绝缘并可配色。一次绕制就能在同一骨架上完成多个绕组。 Two or more parallel bonded, individually insulated magnet wires — several windings in a single pass, colour coded.

BIFILAR · TRIFILAR
2 – 6 WIRES

产品概述Overview

Multifilar® 是把两根或更多并排粘结的电磁线做成一根成品线,每根磁线各自绝缘,并可指定不同的颜色以便识别。 Multifilar® bonds two or more parallel magnet wires into a single finished wire, each individually insulated and colour coded for identification.

一次绕制就能在同一个骨架上完成多个绕组——对双线并绕、共模电感与多相绕组,这意味着生产节拍成倍提升,同时避免并行线在绕制中错位。 One pass produces several windings on the same bobbin — for bifilar, common-mode chokes and multi-phase windings that means multiplied throughput with no strand misalignment.

并线数Parallel wires
2 – 6
配色Colour coding
可指定To spec
粘结Bond
平行粘结
热等级Class
155 – 200 °C
Multifilar
并排粘结的多根独立绝缘磁线Parallel bonded, individually insulated magnet wires

解决的三个问题Three problems it solves

  • 绕组错位并行线在绕制中不会扭转或交叉,匝数关系严格一致Parallel wires can't twist or cross — turn ratios stay exact
  • 工序次数多次绕线压缩为一次,缩短节拍并减少上下料Multiple winding passes collapse into one, cutting cycle time
  • 接线错误靠颜色识别起止线,降低手工接线的错接率Colour coding identifies starts and finishes, reducing wiring errors
配置Configuration 典型应用Typical use
Bifilar 双线共模电感、推挽变压器Common-mode chokes, push-pull transformers
Trifilar 三线三相辅助绕组、耦合电感Three-phase aux windings, coupled inductors
4–6 多线多相电机、定制传感器Multi-phase motors, custom sensors

定制要点Customisation

  • 线间距决定成品宽度与绕线槽的匹配Sets finished width and slot fit
  • 配色方案建议用高对比色,便于产线目视检查Use high-contrast colours for line inspection
  • 单线线径各根可相同,也可按设计不同Strands may match or differ by design
  • 剥离方式粘结层需整体剥离,建议激光或热剥The bond must be removed as a unit — laser or thermal stripping

Multifilar® 是定制件,从确认配置到交货通常需要数周。请在打样阶段就把绕线机参数一起纳入验证。Multifilar® is a custom build — expect weeks from configuration to delivery. Validate your winder settings during the sample stage.

常见问题Frequently asked questions

Multifilar® 是什么?What is Multifilar®?

2–6 根独立绝缘导线平行并绕并粘结的线材,颜色可按客户要求指定,便于区分绕组。Two to six individually insulated wires laid parallel and bonded, with colours specified by the customer for easy identification.

与 Litz 线的区别?How is it different from Litz?

Litz 通过换位绞合降低交流损耗;Multifilar 平行不换位,用于多路绕组、双线并绕与需要颜色识别的场合。Litz twists and transposes strands to cut AC loss. Multifilar stays parallel — for multi-circuit windings, bifilar winding and colour-coded assemblies.

热等级与粘结方式?Thermal class and bonding?

热等级 155–200 °C,粘结层可按绕线工艺选择热激活或溶剂激活。155–200 °C, with heat- or solvent-activated bonding depending on the winding process.

双线并绕该选 Multifilar 还是 Litz?Multifilar or Litz for bifilar winding?

看目的:要区分绕组、做多路并联或靠颜色识别,用 Multifilar®(平行不换位);要降低高频交流损耗,用 Litz(换位绞合)。两者解决的不是同一个问题,选错了不解决问题。It depends on the goal: for separate circuits, parallel paths or colour identification, use Multifilar® (parallel, no transposition); to cut high-frequency AC loss, use Litz. They solve different problems.

还有其他问题?把规格发给我们,48 小时内回复。Still have questions? Send us your spec — we reply within 48 hours.

询价与技术支持Quote & support

把规格发给我们。Send us the spec.

上海团队提供中文技术对接与等效替代建议;标准规格库存充足,常见型号 6–8 周内到货。Our Shanghai team handles Chinese-language support and cross-referencing; standard specs are well stocked, common models arrive in 6–8 weeks.

获取报价Request a quote→