首页Home/ MWS wire/ 电镀合金Plated Cu & Ni alloys

08 / 电镀08 / Plating

电镀合金Plated Cu & Ni alloys

自定义电镀的铜与镍合金导体,镀层可选金、银、锡、镍。镀层既解决防腐与可焊性,也用于调校高频表面导电性。 Custom plated Cu and Ni alloy conductors in gold, silver, tin and nickel — for corrosion, solderability and HF surface conduction.

Au · Ag · Sn · Ni
AWG 16 – 50

产品概述Overview

我们提供自定义电镀的铜与镍合金导体,镀层可选金、银、锡、镍。基材不只是铜——镍合金在高温与腐蚀环境下表现出完全不同的性格。 Custom plated copper and nickel alloy conductors in gold, silver, tin or nickel. The substrate isn't always copper — nickel alloys behave very differently at temperature and in corrosive service.

镀层既是防腐与可焊性的解决方案,也是高频表面导电性的调音手段。同一根导体换一种镀层,端接工艺与高频响应都会改变。 Plating solves corrosion and solderability, and also tunes high-frequency surface conduction. Change the plating and both termination and HF response change.

镀层Platings
Au / Ag / Sn / Ni
基材Substrates
Cu · Ni alloys
线径Gauge
AWG 16 – 50
形态Form
单丝 / 绞合Solid / stranded
Plated wire
镀层厚度与附着力直接影响端接可靠性Plating thickness and adhesion drive termination reliability

镀层选择Plating options

镀层Plating 优势Strength 注意Watch out
银 Ag最高表面导电性,射频首选Highest surface conductivity, RF favourite易硫化发暗Tarnishes with sulphur
金 Au化学稳定性极佳,接触电阻稳定Excellent stability, stable contact resistance成本高,不宜过厚Costly; avoid over-thickness
锡 Sn可焊性最好,成本低Best solderability at low cost易生晶须,需评估Whisker risk — evaluate
镍 Ni耐高温、耐腐蚀,阻扩散Heat and corrosion resistance, diffusion barrier导电性低于铜Lower conductivity than copper

镍合金基材(如 CuNi、NiCr)常用于需要高电阻、耐高温或热电偶补偿的场合。它们不是「更好的铜」,而是另一种材料。 Nickel alloys (CuNi, NiCr) serve high-resistance, high-temperature or thermocouple-compensation roles. They aren't better copper — they're a different material.

如何选How to choose

  • 端接方式焊接选锡/银;压接与激光焊选镍或金Solder: Sn/Ag. Crimp or laser weld: Ni or Au
  • 环境含硫环境避免裸银;高温优先镍Avoid bare silver in sulphur; nickel for heat
  • 镀层厚度按插拔次数与接触电阻要求确定Set by mating cycles and contact resistance
  • 基材需要高电阻或耐热时才考虑镍合金Consider Ni alloys only for resistance or heat

镀层不是越厚越好。过厚的镀层会增加脆性,在反复弯折时开裂剥落——尤其在最细的线径上。Thicker plating isn't better. Excess thickness becomes brittle and flakes under flexing — especially at the finest gauges.

常见问题Frequently asked questions

可以选哪些镀层与基材?Which platings and substrates are available?

镀层包括金、银、锡、镍;基材为铜与镍合金,线径 AWG 16–50,可做单丝或绞合。Gold, silver, tin and nickel on copper or nickel-alloy substrates, AWG 16–50, as solid or stranded wire.

镀银、镀金分别用在哪?When do you use silver versus gold?

镀银用于高频与低损耗场合,镀金用于低接触电阻与长期可靠性,镀锡便于焊接,镀镍耐蚀耐温。Silver for high frequency and low loss, gold for low contact resistance and long-term reliability, tin for solderability, nickel for corrosion and temperature resistance.

能否做复合镀层?Can you do layered platings?

可做底镀加面镀的组合,按端接工艺、接触电阻与成本综合确认。Yes — strike plus topcoat combinations, chosen against termination process, contact resistance and cost.

镀层厚度怎么定?How thick should the plating be?

按接触方式与寿命定:焊接场合通常 1–3 μm 即可;压接、插拔或高频场合需要更厚的银层;金层用于低接触电阻时薄而致密比厚更关键。厚度直接决定成本,先定端接工艺再定厚度。By contact method and life: 1–3 μm usually suffices for soldering; crimp, mating or RF duty needs thicker silver. For gold, density matters more than thickness at low contact resistance. Thickness drives cost, so fix the termination process first.

还有其他问题?把规格发给我们,48 小时内回复。Still have questions? Send us your spec — we reply within 48 hours.

询价与技术支持Quote & support

把规格发给我们。Send us the spec.

上海团队提供中文技术对接与等效替代建议;标准规格库存充足,常见型号 6–8 周内到货。Our Shanghai team handles Chinese-language support and cross-referencing; standard specs are well stocked, common models arrive in 6–8 weeks.

获取报价Request a quote→