产品概述Overview
激光剥离(laser ablation)是一种非机械的剥线方法:用紫外激光在精确位置去除漆包层,形成干净的「窗口」,导体本身不受机械损伤。 Laser ablation strips insulation without contact: UV laser energy removes the enamel at an exact position to form a clean window, leaving the conductor mechanically untouched.
紫外波长短、脉宽为纳秒级,能量被聚合物涂层吸收而大部分从金属表面反射,因此热量极少,绝缘层近乎「冷蒸发」。 The short UV wavelength and nanosecond pulses are absorbed by the polymer but largely reflected by the metal, so there's minimal heat and near-cold evaporation of the insulation.
为什么需要它Why it matters
- 超细线机械剥漆会拉断 50 AWG 以下的线Mechanical stripping breaks wire below 50 AWG
- 批量一致性每个窗口的位置与长度完全可重复Window position and length are fully repeatable
- 卷对卷可在连续长度上剥出多个窗口,直接进入后道装配Multiple windows on continuous lengths feed straight into assembly
- 医疗互连带状电缆组件可加速并简化连接工艺Ribbon cable assemblies simplify and accelerate connection
传统剥漆依赖刀片或热剥,前者容易划伤导体、后者会留下残碳。对需要长期可靠性的医疗与航天线束,这两点都可能致命。 Blade stripping scratches the conductor; thermal stripping leaves carbon residue. For medical and aerospace harnesses needing long-term reliability, either can be fatal.
规格与交付Spec & delivery
- 线径适用于超细漆包线,典型 30 – 50 AWGTypically 30 – 50 AWG enamelled wire
- 窗口长度按端子长度定制,最小 0.5 mmCustom to terminal length, down to 0.5 mm
- 涂层聚酰亚胺与聚氨酯体系均可处理Polyimide and polyurethane systems supported
- 检验窗口处目视 + 电阻抽检Visual plus resistance spot-check at windows
激光剥离需要针对每种线径与涂层单独调参。换料号时请重新验证,不要假设参数可以沿用。Laser settings are tuned per gauge and coating. Re-qualify on every part change — don't assume parameters carry over.
常见问题Frequently asked questions
激光剥离做什么?What does laser ablation do?
用 UV 激光定点去除漆包线绝缘,精度 ±0.05 mm,全程无机械接触。A UV laser removes enamel at defined windows to ±0.05 mm with no mechanical contact.
相比机械剥漆有什么优势?What are the advantages over mechanical stripping?
不伤导体、无毛刺、无刀具磨损,可 roll-to-roll 连续处理细线与扁线。No conductor damage, no burrs, no tool wear, and roll-to-roll processing of fine and flat wire.
适用哪些产品?Where is it applied?
需要局部去漆再焊接或压接的漆包线、Litz 线端部、微型电感与传感器绕组。Enamelled wire needing local stripping before soldering or crimping, Litz terminations, micro inductors and sensor windings.
激光剥离会损伤导体吗?Does laser ablation damage the conductor?
不会。UV 激光按漆层厚度设定能量,只去除有机物绝缘,铜基体既不接触刀具也不受机械应力,剥离窗口边缘整齐、无毛刺;对超细线与扁线尤其重要。No. The UV energy is set to the enamel thickness, removing only the organic insulation — the copper sees no tool and no mechanical stress, and the stripped window has clean, burr-free edges. That matters most for ultrafine and flat wire.
还有其他问题?把规格发给我们,48 小时内回复。Still have questions? Send us your spec — we reply within 48 hours.
询价与技术支持Quote & support
把规格发给我们。Send us the spec.
上海团队提供中文技术对接与等效替代建议;标准规格库存充足,常见型号 6–8 周内到货。Our Shanghai team handles Chinese-language support and cross-referencing; standard specs are well stocked, common models arrive in 6–8 weeks.